SMA Sunny Tripower

This Enapter Device Blueprint integrates the SMA Sunny Tripower solar inverter via Modbus TCP API implemented on the Enapter Virtual UCM.

Supported SMA Sunny Tripower Models

STP 15000TL-30 (STP 15000TL-30)
STP 17000TL-30 (STP 17000TL-30)
STP 20000TL-30 (STP 20000TL-30)
STP 25000TL-30 (STP 25000TL-30)
STP3.0-3AV-40 (STP3.0-3AV-40)
STP33-US-41 (STP33-US-41)
STP50-40 (STP50-40)
STP50-41 (STP50-41)
STP50-JP-40 (STP50-JP-40)
STP50-JP-41 (STP50-JP-41)
STP50-US-40 (STP50-US-40)
STP50-US-41 (STP50-US-41)
STP62-US-41 (STP62-US-41)
Sunny Tripower 10.0 (STP10.0-3AV-40)
Sunny Tripower 10.0 SE (STP10.0-3SE-40)
Sunny Tripower 4.0 (STP4.0-3AV-40)
Sunny Tripower 5.0 (STP5.0-3AV-40)
Sunny Tripower 5.0 SE (STP5.0-3SE-40)
Sunny Tripower 6.0 (STP6.0-3AV-40)
Sunny Tripower 6.0 SE (STP6.0-3SE-40)
Sunny Tripower 8.0 (STP8.0-3AV-40)
Sunny Tripower 8.0 SE (STP8.0-3SE-40)
content_copy

Connect to Enapter

• Sign up to Enapter Cloud using Web or mobile app (iOS, Android).
• Install Enapter Gateway to run Virtual UCM.
• Create Enapter Virtual UCM.
• Upload this blueprint to Enapter Virtual UCM.
• Use Configure command in Enapter mobile app or Web to set up SMA Sunny Tripower communication parameters:
  • Modbus IP address, use either static IP or DHCP reservation. Check your network router manual for configuration instructions.
  • Modbus Unit ID, can be found in SMA Web interface, default value is 3.

References

• SMA Sunny Tripower manuals
• SMA Sunny Tripower Modbus parameters and measured values
• SMA Modbus interface