EFOY H2 Cabinet N-Series

This Enapter Device Blueprint integrates EFOY H2 Cabinet N-Series - indoor cabinet solution for EFOY Hydrogen fuel cells. Thanks to FC Controller it's possible to monitor and control via ModBus RTU over RS-485 communication interface optimized for Arrakis MK4 IPC.

Configuring RS485 Ports of Arrakis MK4

EFOY H2 Cabinet N-Series works over RS-485 port. Arrakis MK4 have universal ports which needs to be configured in BIOS of the IPC to required mode.

1. Reboot IPC and press Del button on the keyboard to enter BIOS setup utility.

2. Navigate to Advanced -> SIO F81804.

   

3. Select the port you would like to use for connection of gas sensor. UART Port 1 (ttyS0) or UART Port 2 (ttyS1).

   

4. Set Peripheral Type to RS485 and press F10 on keyboard to save and exit configuration

   

Connect to Enapter

• Sign up to the Enapter Cloud using the Web or mobile app (iOS, Android).
• Setup Enapter Gateway on your Arrakis MK4.
• Create vUCM using the mobile app.
• Upload this blueprint to vUCM.

References

• EFOY H2 Cabinets product page;
• EFOY H2 Cabinet N-Series Datasheet.
• Arrakis MK4 IPC