MicroArt MAC Titanator

This Enapter Device Blueprint integrates MicroArt MAC (MAP) Titanator battery inverter / UPS via HTTP REST API implemented on Enapter Virtual UCM.

The inverter exposes its data through the built-in Malina2 (Raspberry Pi-based) gateway which provides a JSON REST interface over Wi-Fi or Ethernet.

Connect to Enapter

• Sign up to Enapter Cloud using Web or mobile app (iOS, Android).
• Use Enapter Gateway to run Virtual UCM.
• Create Enapter Virtual UCM.
• Upload this blueprint to Enapter Virtual UCM.
• Use Configure command in Enapter mobile app or Web to set up communication parameters:
  • IP Address — IP address of the Malina2 gateway. Use either static IP or DHCP reservation. Check your router manual for configuration instructions.

Requirements

• MicroArt MAC (MAP) Titanator inverter with the Malina2 (Малина2) built-in gateway module.
• The Malina2 gateway must be accessible on the local network (Wi-Fi or Ethernet).
• Enapter Gateway on the same network as the Malina2 gateway.

References

• MicroArt MAC Titanator product page
• MAC Titanator datasheet (Russian)
• Malina2 HTTP REST API manual (Russian)