Viessmann Vitobloc 200/300

This Enapter Device Blueprint integrates Viessmann Vitobloc 200/300 - combined heat and power units for natural gas and LPG operation via Modbus TCP implemented on Enapter Virtual UCM.

Connect to Enapter

• Sign up to Enapter Cloud using Web or mobile app (iOS, Android).
• You will need to set up this device via Vitogate, more info can be found here here and here.
• Use Enapter Gateway to run Virtual UCM.
• Create Enapter Virtual UCM.
• Upload this blueprint to Enapter Virtual UCM.
• Use the Set Up Connection command in the Enapter mobile or Web app to set up the Viessmann Vitobloc 200/300 communication parameters:
  • Modbus IP address, use either static IP or DHCP reservation. Check your network router manual for configuration instructions.
  • Modbus Unit ID, can be found via the built-in LAN interface or via customer support.

References

• Viessmann Vitobloc 200/300 product page
• Viessmann Vitobloc 200/300 Modbus documentation, DE
• Viessmann Vitobloc 200 operating instructions, EN