SMA Sunny Boy
SMA Sunny Boy solar inverter
SMA Sunny Boy
SMA Sunny Boy solar inverter.
Installation Guide
View on GithubThis Enapter Device Blueprint integrates the SMA Sunny Boy solar inverter via Modbus TCP API implemented on the Enapter Virtual UCM.
Supported SMA Sunny Boy Models
Sunny Boy 1.5 (SB1.5-1VL-40)
Sunny Boy 1.5 (SB1.5-1VL-40)
Sunny Boy 2.0 (SB2.0-1VL-40)
Sunny Boy 2.0 (SB2.0-1VL-40)
Sunny Boy 2.5 (SB2.5-1VL-40)
Sunny Boy 2.5 (SB2.5-1VL-40)
Sunny Boy 3.0 (SB3.0-1AV-40)
Sunny Boy 3.0 (SB3.0-1AV-41)
Sunny Boy 3.0 (SB3.0-1AV-41)
Sunny Boy 3.0 (SB3.0-1SP-US-40)
Sunny Boy 3.6 (SB3.6-1AV-40)
Sunny Boy 3.6 (SB3.6-1AV-41)
Sunny Boy 3.6 (SB3.6-1AV-41)
Sunny Boy 3.8 (SB3.8-1SP-US-40)
Sunny Boy 4.0 (SB4.0-1AV-40)
Sunny Boy 4.0 (SB4.0-1AV-41)
Sunny Boy 4.0 (SB4.0-1AV-41)
Sunny Boy 5.0 (SB5.0-1AV-40)
Sunny Boy 5.0 (SB5.0-1AV-41)
Sunny Boy 5.0 (SB5.0-1AV-41)
Sunny Boy 5.0 (SB5.0-1SP-US-40)
Sunny Boy 5.5-JP (SB5.5-LV-JP-41)
Sunny Boy 6.0 (SB6.0-1AV-41)
Sunny Boy 6.0 (SB6.0-1AV-41)
Sunny Boy 6.0 (SB6.0-1SP-US-40)
Sunny Boy 7.0 (SB7.0-1SP-US-40)
Sunny Boy 7.7 (SB7.7-1SP-US-40)
Connect to Enapter
- Sign up to Enapter Cloud using Web or mobile app (iOS, Android).
- Install Enapter Gateway to run Virtual UCM.
- Create Enapter Virtual UCM.
- Upload this blueprint to Enapter Virtual UCM.
- Use Configure command in Enapter mobile app or Web to set up SMA Sunny Boy communication parameters:
- Modbus IP address, use either static IP or DHCP reservation. Check your network router manual for configuration instructions.
- Modbus Unit ID, can be found in SMA Web interface, default value is 3.
References
Runs on
